I will write my challenge to connect an IDE Hard Disk (or a CF Card with IDE adapter) to my Amiga 500 in the PC case. I don’t have a problem with space so I can put a read HDD if I can succeed.
First of all I found a PCB on this site:
https://www.pcbway.com/project/shareproject/Amiga_500_IDE_Emulator.html
Then I started soldering the parts. So I will continue to write as I progress.
The Components are :
2pcs Male pin 2.54mm Header Socket Row Strip ( IDE pins)
2pcs 40Pin (2x32pin) 2.54mm Single Row Round Female Pin Header Socket (CPU socket+pins)
1pc 100uF capacitor
2pcs 0.33uF capacitor
1pc 74F00 TTL chip
1pc 74HCT688 TTL chip
1ps SIP-9 100K Ohm Resistors Array